SpeedoDRD

SpeedoDRD Model Selection Helper Tool... [CLICK HERE]

New for 2020, SpeedoDRD has been decreased in size to only 20mm square and epoxy sealed with weatherproof device connectors; making it the smallest, most durable, and most feature packed device on the market.

Note: The SpeedoDRD cannot alter an existing odometer readout. The SpeedoDRD corrects and fixes the speed signal after it was altered by something else, such as sprocket changes or tires size changes or transmission changes.

Note: Yamaha auto-cancel turn signals on VSTAR bikes and some other motorcycles do NOT work properly when the speedometer signal is calibrated. Calibrating the signal can cause the auto-cancel turn signals to stop canceling correctly. This is not a problem with the SpeedoDRD; it occurs because the turn signal canceling system relies on the uncalibrated speedometer signal.

If your vehicle model & year is not in the list, you may need to order the Universal Kit. All other models listed in the drop down list are Plug and Play Motorcycle Models. If you order the Universal Kit you can specify your vehicle model & year in the checkout notes. You can also contact us to inquire if we have a plug and play solution in the works for your model.

The U1 (Universal Kit 1) does require some basic wiring to install. It's fairly easy, and only 4 wires; [positive, ground, signal-in, signal-out]. Universal Kit works for Cars, Trucks, & Motorcycles with digital odometers, and 3 wire square wave speed sensors. For more rare 2 wire inductive coil sine wave sensors order model U2 (Universal Kit 2 [not to be used on ABS sensors])

• The smallest electronic speedometer/odometer calibration device in the world.
• Now even smaller design, less than 20mm x 20mm (0.8") square.
• Saves max speed, which can be recalled to your stock speedometer gauge
• Widest calibration range on the market (percentage and multiplier/divider adjustment capability)
• Built in testing mode to ensure proper installation
• Easier to setup than any other device on the market
• Simple plug-in installation for many vehicles
• Works for any 3 wire Hall Effect Sensor, or 2 wire Ground Switch Sensors
• Works for vehicles which display MPH or KPH
• Ability to convert MPH to KPH, or KPH to MPH
• Ratio based correction in 0.1% steps, up to 99.9% + or -
• Fractional frequency multiplier & divider with 0.1 steps, up to 99.9 + or -
• Weather proof design to protect against the elements
• 18" wiring harness (1.5ft)
• 3 year product replacement warranty
• Made in the USA

The SpeedoDRD multiplier/divider feature is a special application feature that allows users to do complete gauge cluster or transmission swaps with vehicles that have completely different PPM (pulse per mile) rates, no other calibration device has a wider frequency adjustment range.